Galfan (5% al zinc) Coating Steel Wire

Model NO.: s-069
Metal Wire Drawing: Hot Drawing
Status: Hard State
Thickness: Metal Thick Wire
Certification: SGS
Wire Diameter: 1-5mm
Tensile Strength: 450-1650MPa
Product Name: Galfan Wire
Trademark: juyun
Transport Package: Coil Packing
Specification: 1-5mm
Origin: China
HS Code: 7217200000
Model NO.: s-069
Metal Wire Drawing: Hot Drawing
Status: Hard State
Thickness: Metal Thick Wire
Certification: SGS
Wire Diameter: 1-5mm
Tensile Strength: 450-1650MPa
Product Name: Galfan Wire
Trademark: juyun
Transport Package: Coil Packing
Specification: 1-5mm
Origin: China
HS Code: 7217200000
Galfan Steel Wire 
1. Material:  Q195,Q235,45#,60#,65#,70#,72B,80#,82B,65Mn
2. Surface Coating: Galvanized, galfan(5% Aluminuim, 95% Zinc coating)
3. Characteristic: High tensile strength,small tolerance Good galvanized, good corrosion prevention Being used for ACSR
4. Packing type:Spool or Coil 
5. Application: Being used for ACSR, fence, agricultural use and so on.
Technical parameters
Wire dia: 1.24-5.5mm; Tensile Strength:450~1340Mpa
Nominal Diameter Tensile Strength Stress at 1% Elongation Twist Elongation Standard
mm Mpa Mpa Times/360°C Lo=250mm As per GB,EN,IEC,JIS,ASTM standard,as well as customer's request
1.24-2.25 ≥1340 ≥1170 ≥18 ≥3%
2.25-2.75 ≥1310 ≥1140 ≥16 ≥3%
2.75-3.00 ≥1310 ≥1140 ≥16 ≥3.5%
3.00-3.50 ≥1290 ≥1100 ≥14 ≥3.5%
3.50-4.25 ≥1290 ≥1100 ≥12 ≥4%
4.25-4.75 ≥1290 ≥1100 ≥12 ≥4%
4.75-5.50 ≥1290 ≥1100 ≥12 ≥4%
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
 

  Galfan Steel Wire 
1. Material:  Q195,Q235,45#,60#,65#,70#,72B,80#,82B,65Mn
2. Surface Coating: Galvanized, galfan(5% Aluminuim, 95% Zinc coating)
3. Characteristic: High tensile strength,small tolerance Good galvanized, good corrosion prevention Being used for ACSR
4. Packing type:Spool or Coil 
5. Application: Being used for ACSR, fence, agricultural use and so on.
Technical parameters
Wire dia: 1.24-5.5mm; Tensile Strength:450~1340Mpa
Nominal Diameter Tensile Strength Stress at 1% Elongation Twist Elongation Standard
mm Mpa Mpa Times/360°C Lo=250mm As per GB,EN,IEC,JIS,ASTM standard,as well as customer's request
1.24-2.25 ≥1340 ≥1170 ≥18 ≥3%
2.25-2.75 ≥1310 ≥1140 ≥16 ≥3%
2.75-3.00 ≥1310 ≥1140 ≥16 ≥3.5%
3.00-3.50 ≥1290 ≥1100 ≥14 ≥3.5%
3.50-4.25 ≥1290 ≥1100 ≥12 ≥4%
4.25-4.75 ≥1290 ≥1100 ≥12 ≥4%
4.75-5.50 ≥1290 ≥1100 ≥12 ≥4%
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
Galfan (5% al zinc) Coating Steel Wire
 

 

Hydraulic 4wd Winches

Hydraulic 4Wd Winches,Two-Stage Planetary Hydraulic Winch,Automactic Screw Cone Braking Winch,Hydraulic Towing Recovery Winch

JINHUA RUNHUA CO.,LTD , https://www.cnirunwinch.com