Bathroom tile maintenance basic knowledge

In the course of use, the tiles often appear loose and fall off, because the cement mortar used in the pasting of ceramic tiles has insufficient adhesion fastness and is exposed to moisture for a long time, so it is easy to loosen and fall off. There is a method of using a resin type adhesive to stick ceramic tiles. The strength can not only meet or exceed the strength of the ceramic tile, but also it will not cause falling off when it is in a humid environment for a long time.
Bathroom tiles are often greasy, rusted, soapy, etc. To keep the porcelain surface clean without damaging the porcelain surface, you can use a multi-purpose decontamination paste to clean. As for the gaps in the tiles, you can use a brush to remove the dirt with a little decontamination paste, and then apply a water repellent to the gap.
At present, a large number of cleaning and disinfectants used in homes contain chemical substances such as acid and alkali that have a great influence on natural stone, and adversely affect the color of stone surfaces and internal mineral components. Particularly serious is that most cleaning agents must react on the surface of the stone for at least five minutes to be effective. However, during this time the cleaning agent has been destroying the stone, so the bathroom stone surface should have a neutral pH value. detergent.

Ceramic tile bathroom bathroom cement

Hot Stamping Foil

Hot Stamping Foil,Hot Foil Stamping Machine ,Foil Stamping ,Foil Printing

Aluminum Sheet Co., Ltd. , http://www.nbaluminumcoil.com